Excessive vibration and noise from a shaking washing machine can be startling and concerning. Issues range from minor out-of-balance loads to major problems with worn shock absorbers. Washing machine vibrating can also be caused by tub suspension problems. This guide explores key troubleshooting steps, both DIY and when to call a professional.
We will address proper shipping materials removal, inspecting wash baskets, using a level to adjust levelling legs, adding reinforcement for uneven floors, replacing damaged parts, using vibration absorption pads, and ensuring stacking kits are properly installed.
Goals of the guide:
- Understand the root causes of washing machine vibrating
- Balance loads and level appliance
- Evaluate the need for appliance repairs
- Correct accessories installation issues causing washing machine vibration
- Reduce vibration through pads and mats
With these tips, you can resolve many vibration problems and restore peaceful operation.
Prepare Washer for Use
Let’s start at the beginning – we’ve gotta make sure your washing machine is ready for action! I see way too many folks miss this step.
You just brought your shiny new appliance home. I get it; you’re excited to toss in that pile of dirty socks and hit start! Before you do, though, we need to remove any shipping materials:
- A clogged pump filter often secures the wash basket during transport. Don’t worry – they usually come with clear instructions on removing them.
- You might also find padding, brackets, tape, or other packaging items. Remove it all!
Trust me, we’re avoiding a disaster here. I once saw a washing machine vibrating so hard it practically danced out the door! The poor lady left the shipping bolt on.
Next up, is your washing machine on a solid, level floor?
- If your floor is uneven, the machine can vibrate like crazy, no matter what.
- Try rocking the washer – does it wobble all over? It can be because of uneven weight distribution!
Let’s get your appliance prepped properly first, then we can dig into the fun stuff – figuring out why its washer is shaking! I’ll walk you through balancing loads, adjusting feet, and more. But patience, my friend! Rome wasn’t built in a day, and we’ll fix your washer quickly.
How’s that floor looking? Ready to keep going?
Balance the Machine
Now that your washer is prepped, we can focus on balancing out any issues that are causing excess vibration.
First, how’s your laundry looking inside the wash basket? I know, I can’t see it! But think about what’s in there.
- Are there any big heavy blankets or comforters?
- A giant sleeping bag?
- Or a whole bunch of towels on one side?
Washing bulky or heavy items can throw the machine off balance – especially during spin cycles. The catch is to distribute the weight evenly in the basket.
Here are some tips:
- With a top-loading washer, arrange items so dense items are spread out.
- Try washing bulky items with a full mixed load to balance it.
- For front-loaders, watch out for 1 or 2 extremely heavy pieces.
Still, the washer vibrates after evenly loading the laundry. The washer itself might be off balance. Let’s check!
Grab a level and place it:
- Across the top of the machine, the first
- Then, front to back
You’ll see if your washer is perfectly level if the air bubble stays right in between the lines of the level tool.
If it’s way off, don’t worry! Those little feet under the washer are adjustable.
- Use pliers or a wrench to turn them and adjust them up and down.
- Just take it slow and easy until the machine sits solid and stable.
Uneven floors can make this tricky. If your floor has major highs and lows, we may need to add reinforcement. But try the feet first – the simplest fix is usually best!
How are we looking? Any difference in the shaking?
Isolate and Absorb Vibration
We’ve levelled the load and balanced the machine, but you’re still getting some pesky vibrations, huh? Time to bring in some shock absorbers – for your washer!
The machine’s handy little shock absorbers are designed to dampen vibrations from the motor and moving parts. But they wear out over time.
Let’s check them:
- Do you hear loud thumps and bangs when your washer spins? Bad sign.
- Try rocking the drum by hand – grinding noises? Another red flag.
If your trusty shock absorbers need replacing, it’s best to call in a service pro. But here are some DIY vibration fixes in the meantime:
These genius little pads go right under the feet of your washer. They lift the machine just a bit, while their rubber construction absorbs bouncing and shaking. Look for thick pads rated for heavy appliances.
Vibration Absorption Mats
Slip a foam or rubber mat under the washing machine to dampen vibrations through the floor. They’re inexpensive and can make a big difference! Combine them with pads under the feet for double protection.
I know the shaking and noise are annoying AF. And you just want to do laundry in peace! By assessing the internal parts and structure causing it, and then isolating your machine from vibration transfer, you can return to clean clothes and fresh towels. Almost there!
Secure Stacked Units Properly
Got a fancy stacked washer-dryer combo giving you fits with all the rattling? Many stacked units depend on a stacking kit to align and secure the two appliances.
If that metal bracket frame weren’t installed correctly, you’d be chasing vibrations for ages!
Give your stacking kit a good look:
- Step 1: Are all the screws, bolts, and fasteners tight as can be? Grab your screwdriver and tighten anything loose.
- Step 2: Check if the bracket connectors are firmly gripping both appliances. If not, carefully adjust until snug.
- Step 3: Inspect for any worn or damaged brackets. Kits don’t cost much if replacements are needed.
Many people cram stacked units into tiny laundry closets or tight corners in the basement or garage. But don’t overlook something as basic as your brackets! Taking a few minutes to inspect and adjust can work miracles.
Let’s get your duo stacked right, quiet down the vibrations, and return to fresh laundry. Just a couple more tweaks, and you’ll be dancing for joy…not because your washing machine vibrates apart!
When to Call a Professional
We’ve gone through quite the journey of getting your washer to chill out! But what if it’s still rattling like crazy?
When should you pick up the phone and call in a repair pro? Here’s my rule of thumb:
- If you’ve tried ALL the tips and tricks in this guide, but the washing machine shaking persists – it’s service time.
- A certified technician should handle taking the machine apart and doing internal repairs.
- Significant structural issues like completely unlevel floors or insufficient framing require an expert contractor’s touch.
I know you were hopeful you could handle this baby solo! But sometimes, you’ve just got to call in the best,i.e., EZFIX Appliance Repair
When searching for repair pros in your area, look for companies that:
- Have strong reviews and ratings
- Offer warranties on work performed
- Employ certified appliance and home system technicians
- Have been operating for 5+ years
Vibration issues with washers are super common across ALL brands and models. A good company will have seen it all and can quickly diagnose and treat the problem!
Stay positive – with a pro assisting on the trickier aspects; you’ll be fluffing clean towels in your peaceful, steady washer in no time.
Compare Washer Models and Technologies
Alright, be honest with me…are you googling new washers yet? I get it – the non-stop washing machine vibrating is torture! Before you chuck your machine, let’s chat about the latest and greatest features designed to stop vibrations.
There have been some awesome advances in washer technology regarding stability in recent years. You’ve got more options than ever to combat noise and rattling problems.
Here are key things to look for:
- Front-load washers spin incredibly fast, which worsens vibration. Seek models advertised with direct drive motors and reinforced internals. LG and Samsung offer superb vibration control.
- Top load technology has come a long way. Look for force cancellation features that detect and adjust spinning to minimize basket wobble. The GE GTW720 washer excels here.
- High-end brands like SpeedQueen and Miele tout heavily reinforced frames and premium components that absorb extra motion.
Anti-vibration Pads & Leveling
- Most washers now come with thick anti-vibration pads pre-installed on their feet from the factory. Nice!
- One-touch self-leveling legs are also popular these days. They automatically adjust to account for uneven floors.
- Look for terms like “QuietPak insulation”, “NoiseReduce Technology”, or “silencing system,” which block operational sounds via insulation and mounts.
- Top brands for quiet, vibration-free washers include Maytag, Whirlpool, LG, Electrolux, and Bosch.
While I always say you should fix instead of ditch, if you’ve truly reached the limit with Shake, Rattle & Roll laundry…it may be time to upgrade! Manufacturers recognize vibration issues customers face, and the latest models provide relief. Look into their stability and noise features – away from the bells and whistles.
There are options to prevent that nightmare washer dance party! Here’s to peaceful laundry days ahead!
Common Washer Vibration Questions
Why does my washer shake so violently during spin cycles?
Ah yes, the dreaded Death Spin! When washers hit those crazy fast spins to wring out your laundry, it can turn into a rattling, walking disaster if the load is unbalanced.
- Start by redistributing heavier items in your wash basket so that the weight is even.
An unleveled machine can also contribute, making it walk all over during spin. Break out the level and adjust those puppies.
What are levelling legs, and how do I adjust them properly?
Washing machines have 4 removable feet underneath that are the “foundation” to keep them steady. If positioned unevenly, vibrations go nuts.
- Use a level across the top of the machine to determine which feet need to go up/down.
Then, grab pliers or wrenches to turn each foot accordingly. Easy fix that makes a massive difference!
My laundry load SEEMS balanced, but the machine still shakes violently. What else should I check?
Your washer may not be level – those handy dandy levelling feet again! Or the shocks could be shot if it’s an older unit.
- Inspect shocks by manually rocking the wash basket. Any odd sounds mean replacement time. Call a repair pro for that job.
- If you hear a pounding with spins, you might need new balance clips and springs—a common fix.
Do I need to remove large stickers, plastic guards, shipping bolts, etc., before using a new washing machine?
Um, YES!! I cannot stress this enough! Leave that stuff on or in place, and you have a blender full of laundry ready to detonate in your laundry room.
Remove every packaging material, tape, bolts, and guards before that first wash. It takes maybe 5 extra minutes – save yourself the explosion cleanup!
Excessive vibration and noise from a shaking washing machine can be annoying and concerning. With some basic troubleshooting information, you can often resolve the issue independently. Start by ensuring the wash load inside the basket is balanced evenly. Then, check that the machine itself is level using adjustable feet underneath. Anti-vibration pads can help absorb extra motion as well. For persistent shaking, worn-out shock absorbers may need replacement by a technician.
Compare features like direct drive motors and reinforced frames on new washer models to prevent vibration problems going forward. With routine maintenance and proper levelling, your home appliance can run smoothly for years. Implement vibration reduction tips and solutions to stop a noisy washer and restore peaceful operation. Reach out to repair professionals if problems continue despite troubleshooting.
The key is systematically assessing the root cause, whether loading, levelling, failing parts or installation. Addressing vibrations quickly preserves the washer’s lifespan and functionality. You can stop the shaking and keep clean clothes flowing with attentive care and mechanical adjustments.